[RDD] Serial Out vs GPIO

Rob Landry 41001140 at interpring.com
Mon May 16 08:23:31 EDT 2016


In my experience there seem to be a lot of RML commands that run fine in 
external scripts but not directly in RDAirplay.


Rob

-- 
Я там, где ребята толковые,
Я там, где плакаты "Вперёд",
Где песни рабочие новые
Страна трудовая поёт.

On Mon, 16 May 2016, Wayne Merricks wrote:

> Hi,
> 
> I have a BT ACS 8.2.  I initially tried to set up the switcher in Rivendell
> but something about Ubuntu didn't like to reliably do it (the serial port
> stopped accepting commands after a while).
> 
> In the end I settled on using RN to call a script that used screen's stuff
> command to do the same thing.
> 
> Its been running fine for about 6months. I wrote it all up here:
> 
> http://rivendell.tryphon.org/wiki/Switchers
> 
> 
> 
> On 13/05/16 19:12, Ben Blevins wrote:
>       Just curious to see how others are using GPIO.  I have a
>       Broadcast Tools SRC-8 III and Star Tech USB to RS232 adapter. 
>       Are you setting up the SRC-8 in the Switchers/GPIO or just
>       controlling via a Macro with an SO RML command directly?   I'm
>       just trying to send relays out to my backhaul for local
>       automation.
> 
> 
> _______________________________________________
> Rivendell-dev mailing list
> Rivendell-dev at lists.rivendellaudio.org
> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
> 
> 
> 
>


More information about the Rivendell-dev mailing list