[RDD] Interface on one machine, playout on another?

Alessio Elmi alessio_elmi at hotmail.com
Wed May 13 03:00:28 EDT 2015


Lorne,
do you think it is possible to mix two audio resources?
Let's say we have Studio A, connected to the mixer and Studio B as a
production workstation. Can we say that RDAirPlay of B must go to studio A
and eventually on air, while RDLibrary stays locally just to manage the
library?

Alessio

Il giorno mer 13 mag 2015 alle ore 07:43 Lorne Tyndale <
ltyndale at tyndaleweb.com> ha scritto:

> Hi,
>
> That is exactly what that Core Audio Engine setting is for.  You can set
> up a new host (in this case, Host 2), and tell it in rdadmin to use the
> audio engine (in this case, another word for the sound card) on Host 1.
> Then you just set your audio in's and out's based on the resources
> available on Host 1.  It works quite well (and can be lots of fun on
> April 1st when you want to make unexpected audio come out of someone's
> cue speaker!)
>
>
>
> > -------- Original Message --------
> > Subject: Re: [RDD] Interface on one machine, playout on another?
> > From: Jay Eames <alchamist at googlemail.com>
> > Date: Wed, May 13, 2015 1:06 am
> > To: John Anderson <john at 2601.net>
> > Cc: "rivendell-dev at lists.rivendellaudio.org"
> > <rivendell-dev at lists.rivendellaudio.org>
> >
> >
> > Not sure if this will help, or in fact if this was part of the design,
> but I have inadvertently done this in the past by setting the host core
> audio engine of an auxiliary machine to that of the playout PC in rdadmin
> host settings.
> >
> > > On 13 May 2015, at 04:43, John Anderson <john at 2601.net> wrote:
> > >
> > >> On Tue, 2015-05-12 at 22:32 -0500, Keith Thelen wrote:
> > >>
> > >> Right now I have one machine all set up and running Rivendell. I'm
> planning on adding a second machine to the mix -
> > >> an all-in-one unit with a touchscreen, no expansion slots, and no
> on-board audio hardware. The purpose of this second
> > >> machine would be to run RDPanel, allowing the talent to have more
> buttons at their fingertips. Simple enough.
> > >
> > > is this the same studio or an extension?  is there some reason you just
> > > didn't add a 2nd screen.
> > >
> > >>
> > >> Thing is, I'd like to have this second machine merely act as an
> extension of the first.
> > >> Any audio playout triggered on it would actually occur on the other
> machine. I'm not talking
> > >> about a netjack-type scenario - the idea would be that no audio would
> actually be handled by
> > >
> > > more like an aux studio...?  I'd likely do a kvm extension on some
> video
> > > extenders...(of course, I do have that laying around).  In a whole lot
> > > of cases, I use an older tried and true (& CHEAP) way to not reinvent
> > > the wheel.
> > >
> > > I know some folks were experiment with thin clients, but, it's seems
> > > like a bit of bother for no real reason
> > >
> > >
> > > _______________________________________________
> > > Rivendell-dev mailing list
> > > Rivendell-dev at lists.rivendellaudio.org
> > > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
> > _______________________________________________
> > Rivendell-dev mailing list
> > Rivendell-dev at lists.rivendellaudio.org
> > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
> _______________________________________________
> Rivendell-dev mailing list
> Rivendell-dev at lists.rivendellaudio.org
> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://caspian.paravelsystems.com/pipermail/rivendell-dev/attachments/20150513/b7aff78b/attachment.html>


More information about the Rivendell-dev mailing list